|Category||Nail Polish Gel|
|More items available upon order||no|
The GelPolish System is a durable, soak off gel system that can be used to adorn and reinforce the natural nails. This thin, self-levelling gel system has excellent adhesion, low odor and great shine.
The Polish Gel Color ElleErre Nails is covering the first pass, medium low viscosity. Cure completely in less than 2 minutes in UV and even less than a minute in LED.
Instructions for Use:
Slightly shake bottle before use.
Use a white block to buff the natural nails slightly.
Apply Nail Primer ElleErre Nails and let dry 30 seconds, a slight sticky layer will remain.
Apply 1 layer of GelPolish Base and cure for 2 min in a UV light / 30 seconds under LED light (305 + 405nm).
Apply 1 layer of GelPolish Color ElleErre Nails and cure for 2 minutes in UV light / 30 seconds under LED light (305 + 405nm).
If additional coverage is desired, apply a 2nd layer and cure for 2 minutes in UV light / 30 seconds under LED light(305 + 405nm).
Apply last layer of GelPolish Top Coat and cure for 2 minutes in UV light / 30 seconds under LED light (305 + 405nm).
Remove the tacky layer with Nail Cleaner and file the sidewalls and free edge as desired.
Do not expose to light or excessive heat. Use only as directed.
Method 1: Discolour the nail with a 180 grit file or buffer blank, imbevi a cotton pad with Remover ElleErre Nails. Sets the cotton pad soaked over the nail with aluminum foil and leave for about 10 minutes. Remove the foil and the residual color with the help of a plastic cuticle pusher or with an orange wood stick.
Method 2: Soak your nails in warm water for 5 minutes, then soak your nails in Remover for another 5 minutes. File off the loose Gel from the surface with a 180 grit file. Be careful do not file file the natural nail. Repeat until the gel is completely removed.
Registered users can share their experience with this product. Register to access all of the benefits reserved to registered users or click on login if you are already registered.